Bulb Ornament


2 pieces 4" x 6" Fun Foam 
(any color except yellow)
1.5" x 2.25" Yellow Fun Foam
Black fine tip permanent marker
12" of craft/floral wire 
1/8" hole puncher
pencil or dowel
Low-temp glue gun & glue sticks
Photo size - 2.5" x 3.5"




Trace and cut out pieces from fun foam according to the patterns. Be sure to cut out the opening for the top frame piece.

Place the top cutout frame onto the backing piece. Glue the pieces together, close to the edges leaving the top unglued. This opening will allow you to slip a photo in.

Glue the yellow "screw" onto the base at the top. Punch a hole in the center top through all the pieces of fun foam. Slip the craft wire through the hole and twist in the center to hold in place. Separate the wires. Use a pencil or dowel to curl the wire ends. This wire is also your ornament hanger.

Add finishing detail lines on the ornament with the black fine tip marker. Slip photo in and hang on your tree or attach to a present or Christmas card.

printer-friendly version

Back Home   Search Category   Search Name