Bunny Box

Supplies

1 qty. 8 ” x 11” White Cardstock for take-out box

1 qty. 2” x 3” White cardstock for ears

1 qty. 1 ” x 3 ” White Cardstock for feet

1 qty. 1” x 2” White Cardstock for paws

1 qty. 2” x 3” Pink Cardstock for inner ears & foot pads

1 qty. 1” x 4” Green Cardstock for grass

3 qty. ” White Pom poms #30006962

2 qty. 10mm Moving eyes #30055157

3 qty. 2” lengths of 26 G. White cloth covered wire #77479352 for the whiskers

Meriken 5/16” double stick tape #30013283

Sakura Quickie Glue Pen #30051737

 

Tools:

Accu Cut Machine and Small Take-out Box die* (die #BX960J)

Pen/Pencil for tracing

Sharp scissors

Hand Punch – Circle ” #77178558

Hand Punch – Heart ” #77178632

Low Temp Glue Gun & Glue sticks

Wire cutters #77819151

 

*Note: Accu Cut machine and die are available for use at the Ben Franklin Craft stores. No charge for use with purchase of paper.

 

 

Diagram 1

 

Directions

Cut out one take-out box from the 8 ” x 11” white cardstock using the Accu Cut die cutting machine and take-out box die. Assemble using double stick tape.

 

Trace and cut out pieces from cardstock according to the patterns. With the scraps of pink cardstock, punch out one heart with the ” heart punch and six circles with the ” hole punch.

 

Fold the box closed and turn it upside down. On one of the wider sides of the box, place the two eyes on and glue in place. Place two white pom poms just below for the cheeks and glue in place. Take the three pieces of cloth covered wire and hold together. Take one of the wires and twist a few times around the bund at the middle. Separate the wires. Place the wires onto the pom poms for the whiskers. Glue in place. Glue the ” pink heart on top in the middle for the nose. Place the two paws below the face and glue in place.

 

Take each white foot piece and place in front of you. Place one pink paw pad and three pink ” circles on each foot, as pictured in the sample. Glue in place. Place a foot on the either side of the bottom of the box, at an angle. Glue in place.

 

Glue the last white pom pom on the other side of the box for the tail.

 

Place the two pink inner ear pieces onto the white ears and glue in place. Crease the bottom of the ears towards the back. Place on top of the bunny and adhere with double stick tape.

 

Glue the last white pom pom on the other side of the box for the tail.

 

Place a piece of grass on either side over the small hole and glue in place.

 

Optional: Open up box and fill with treats.

 

 

 

2008 Ben Franklin Crafts, Inc.

 

  printer-friendly version

 

Back Home   Search Category   Search Name   All Projects List