Fall Angel Pin


Orange Hearty Clay #30030918
1 qty.   20mm Wood Bead #77614990
12” of 1/8” ribbon –orange or yellow
8” of 5/8” sheer ribbon, yellow, orange or white
Small Paper flowers or similar
Black Acrylic Paint #77624890
White Acrylic Paint #77624882
1” pinback #77403337 or #77126987


Hearty Clay Color Scale Tool #77856054
Thin Paintbrush
Low temp Glue gun & Glue sticks


Using the Hearty Clay Color scale tool, measure out three “G” balls of Orange Hearty Clay. Take each ball and shape into a teardrop. Slightly flatten out the teardrop to form a petal shape.

Lay one petal in front of you with the smaller tip at the top. Place the remaining two petals on either side, slightly overlapping the center petal. Set aside.

Take the 20mm wood bead and find the smoothest area for the face. Use the end of the paintbrush and paint to small dip dots with the black acrylic paint for the eyes. Let dry.

Use the end of the paintbrush to make a smaller dip dot of white acrylic paint on each of the eyes. Let dry.

Glue a couple of small paper flowers to the top of the head, covering the bead hole. Place the head on the top of the Hearty Clay petals and glue in place.

Make a small loopy bow with the 1/8” ribbon. Glue below the head. Make a bow with the sheer ribbon and glue to the back of the angel. Glue the pin back behind.


  printer-friendly version


Back Home   Search Category   Search Name