Manuscript Washi Card

Supplies:
  • HeartyŽ Air Dry clay - Black (Item #1304)
  • Card Stock 4-1/4" x 5-1/2" Black or Dark Gray
  • Manuscript Washi Paper 3" x 5"
  • Rubber Stamp - Choice of design
  • Rub 'n Buff Gold
  • Paper Glue
  • Clay Roller (Item #1584)
  • Clay Board (Item #1585)
  • Hi-Gloss Varnish
  • Scrap Ribbons - 2 to 3 coordinating colors

 

 

Tear Manuscript paper into desired shape. Roll clay flat approximately 1/8" thick.  The flattened size of clay should be about 1/4" larger than the paper. Apply 2 drops of water onto clay surface.  Gently roll paper onto clay
Tear clay around the outer edges; follow the shape of the Washi paper.  Let dry.  After clay dries, apply 2 coats of varnish. Roll clay into a ball (size of ball depends on size of rubber stamp). Flatten clay 1/4" thick and stamp clay.  Let dry.  After clay dries, apply 2 coats of varnish.
Glue Washi clay sheet to the front of card; glue the stamped clay on top of the Washi clay sheet. Cut 3 strands of scrap ribbons 4" in length.  Make a loose knot at the center and glue ribbon on top of the stamped clay.

printer-friendly version

 

Back Home   Search Category   Search Name