Monkey Photo Frame

 

Supplies

5" x 6.5" Foamie
4.5" x 6" Foamie
4" x 4" Brown Foamie
4.5" x 3" Flesh Foamie
2 - 5 mm Moving eyes
Black fine tip permanent marker
Low temp glue gun and glue sticks

Directions

Trace and cut out pieces from foamie according to the patterns. Don't forget to cut our the center of the 4.5" x 6" foamie as indicated.

Center the 4.5" x 6" foamie rectangle onto the larger foamie rectangle. Glue together around the two sides and bottom edges, leaving the top open. This forms the main frame and lets you slip a photo in through the top.

Place the monkey piece on the top left corner of the frame. Position the monkey so that the tail curls at the center point of the frame. Glue to the frame, making sure not to glue the top opening. Position the arm along the left side below the monkey. Glue in place. Glue the muzzle to the monkey's head. Position and glue the inner ears to the ears.

Glue the eyes above the muzzle. Use the black fine tip marker to add detail lines. Slip a photo in and hang from the tail.

printer-friendly version

 

Back Home   Search Category   Search Name