Note & Pen Pal

Keiki Project

Supplies:

Aqua Tube #7778 8117

4" x 4" White Foamie #7761 3612 for the body & tail

1 3/4" x 2 1/4" White Foamie #7761 3612 for the head

2" x 3 1/2" Cocoa Foamie #3004 1092

1/2" x 1/2" Black Foamie #7761 3620

2 – 10mm Moving Eyes #7766 0845

1 3/4" wooden Mini-Spring Clothespin #7767 6577

Black fine tip marker #91029

Low temp Glue Gun & Glue Sticks

 

Directions:

Trace and cut out pieces from foamies according to the patterns. Take the black fine tip marker and lightly outline the pieces to highlight.

 

Remove the cap for the aqua tube and place upside down. Place the rounded bottom of the tube into the cap and glue in place. Place the body piece upright along the tube and glue in place.

 

Place the clothespin behind the dog’s head with the spring opening at the pointed end. Glue in place and flip over to the right side. Place the dog’s head with the tip facing up and glue the black nose on the tip end. Position the eyes below the nose and glue in place. Place the ears so that they are dangling down as in the sample picture and glue in place. Position the head on the top of the body with the nose facing upwards. Glue the head to the body.

 

Glue the brown tip to the tip of the tail. Position the tail towards the bottom center of the body and glue in place. Use the scraps of Cocoa foamie and cut out “spots” for the dog. Place on the body and glue in place.

 

Place notes in the clothespin clip and pens in the aqua tube.

 

 

2006 Ben Franklin Crafts, Inc.

printer-friendly version

 

Back Home   Search Category   Search Name