Panda Jar

SUPPLIES:

5 1/3” Crimp Top Ivy Bowl (77774695)
Plain Ivy Bowl (77981787)
8” x 8” Black Felt
2” x 3” Black fun Foam
1.5” x 1.5” Red Fun Foam
2 – 10 mm Moving Eyes
White Acrylic Paint
Satin varnish sealer
Sponger or sponge brush
Black fine tip Permanent marker
15” of ribbon for Bow (at least 1”)
Low Temp Glue gun & glue sticks

DIRECTIONS:  

Wash both bowls and dry completely. Using the sponge or sponge brush, paint the outside of both bowls with the white acrylic paint. Let dry. When completely dry, seal with a cost of satin varnish. Let dry.

Trace and cut out pieces from felt and fun foam according to the patterns. Take 2 arm pieces and place together, matching the edges. Glue together. Repeat with the other arm pieces. Do the same for the feet pieces.

Turn the smaller plain ivy bowl upside down and place inside of the top of the crimp top ivy bowl. The smaller bowl is the panda’s head. Place the felt ears on either side on top of the head. Glue in place. Place the black eye patches on the face and glue in place. Glue the moving eyes to the black eye patch. Glue the nose below the eyes. Using the black fine tip permanent marker, draw a smile below the eyes.

Place the arm pieces on either side of the crimp top ivy bowl below the neck. Glue in place. Place the feet at an angle on either side f the bottom of the bowl. Glue in place. Glue the red heart on the left side of the Panda’s chest. Tie the ribbon around the neck and finish with a bow. Fill jar with treats!

printer-friendly version

Back Home   Search Category   Search Name