Pumpkin Kitty Pin

 

Supplies

2” x 2” Orange Foamie #7761 3521

1” x 1” Brown Foamie #7761 3562

1” x 1” Green Foamie #7761 3570

2” x 2” Black Foamie #7761 3620

1” x 1” White Foamie #7761 3612

Scrap of Pink Foamie #7761 3596

1/16” Hole Punch #7717 8533

Black fine tip Sharpie Marker #7753 1954

3” Green Wire – 24 gauge #3002 0891

2 – 7mm Moving Eyes #7766 0837

Pin Back #7712 6987 or #7740 3337

Low Temp Glue Gun & Glue sticks

Thin Paintbrush handle for curling wire

Directions

Trace and cut out pieces from Foamie according to the patterns.

Glue the brown stem to the top of the pumpkin. Curl the green wire. Place the curled wire around the stem for vines. Glue the green leaf next to the stem.

Glue the 2 white circles on the lower third of the cat’s face for the muzzle. Use the black Sharpie marker to draw in whiskers. Use the 1/16” hole punch and punch out one pink circle for the nose. Glue nose to the middle top of the muzzle.

Glue the 2 moving eyes above the muzzle. Position the cat’s head and paws on the top of the pumpkin. Glue in place. Position the tail behind the pumpkin and glue in place. Glue the pin back behind the pumpkin.

printer-friendly version

 

Back Home   Search Category   Search Name