"Adopt-a-Dog" Puppy Pin



White Hearty Clay #3000 6454

Brown Hearty Clay #3001 6915

Black Hearty Clay #7785 6013

Red Hearty Clay #7785 6005

Hearty Clay Color Scale tool #7785 6054

Tacky Glue #7760 9875

Pin Back #7712 6987 or #7740 3337

Low temp Glue gun & Glue sticks


Using the Hearty Clay color scale tool, measure out an “I” ball of white Hearty Clay and mix with an “E” ball of Brown Hearty Clay. Mix well to achieve a light brown. Roll the clay into a ball and shape into a rounded triangular shape for the puppy’s head.

Measure out 2 “F” balls of brown. Shape each ball into an elongated teardrop for the puppy’s ears. Place an ear on each side of the head.

Measure out a “B” ball of white clay. Divide the ball in half and roll into 2 smaller balls. Place on the lower third of the face for the muzzle.

Measure out an “A” ball of black clay and divide in half. Take one half and roll into a ball for the nose. Place the nose on the top center of the muzzle. Divide the remaining half in half again. Roll into 2 tiny balls for the eyes. Place on the face above the muzzle. Note: You can use a little tacky glue to secure if necessary. Set puppy aside.

Measure 3 “I” balls of red Hearty Clay. Roll together into a 5” – 6” log about ” thick. Join the ends of the log together and shape into a heart. Take out some clay to make the heart smaller if necessary. Place puppy’s head onto the heart. Use a little tacky glue to secure if necessary. Let dry. Glue the pin back behind the heart.

printer-friendly version

Back Home   Search Category   Search Name