Reindeer Pal

Keiki Project







2- 1/2” x 5” Cocoa Foamie #3004 1092

1” x 3” White Foamie #7761 3612

1/2” x 1/2” Red Foamie #7761 3604

2 - 7mm Moving Eyes #7766 0837

White Acrylic Paint #7762 4882

1/4” Hole Punch #7717 8558

Thin Paintbrush

Pin Back #7712 6987 or magnet #7762 2688

Low Temp Glue Gun & Glue Sticks





Trace and cut out pieces from foamies according to the patterns. Snip legs apart along the dotted line.


Place the “heart” chest above on the reindeer’s body above the top of the front legs. Glue in place. Place the reindeer’s head above the chest on the body as shown on the sample. Glue head in place. Place the eyes in the center of the head and glue in place. Place the red nose at the bottom tip of the head and glue in place. Position antlers behind the top of the reindeer’s head and glue in place.


Place the tail at the other end of the body above the top pf the back legs and glue in place.


Paint the “hoof” details to the bottom of the legs with the white acrylic paint. Use the paint to add the inner ears and details on the top of the head. Use the end of the paintbrush to make dip dot spots on the reindeer’s back. Let paint dry.


Glue a pin back or magnet behind the reindeer.

© 2006 Ben Franklin Crafts, Inc.


printer-friendly version


Back Home   Search Category   Search Name