Sweetheart Pin

 

Supplies

2” x 2” White Foamie #7761 3612

” x 2” Black Foamie #7761 3620

2” x 2” Red Foamie #7761 3604

” x 1” Pink Foamie #7761 3596

2 – 7mm moving eyes #7766 0837

Pin back #7712 6987 or #7740 3337

Low temp glue gun and glue sticks

Directions

Trace and cut all the pieces from Foamie according to the patterns.

Place the 2 ears on either side of the head and glue in place. Place the “eye patch” on the left side of the face and glue in place. Place a moving eye onto the patch.

Position the other eye next to it and glue both eyes in place. Position the nose below the eyes and glue in place.

Position the pink shadow detail onto the upper right curve of the heart and glue in place. Position the heart towards the bottom half of the dog’s face. Glue to the dog’s face. Place the paws on either side of the heart as if it is holding it. Glue in place. Glue the pin back behind the dog’s head.

printer-friendly version

 

Back Home   Search Category   Search Name