Sweetheart Pin

Keiki Project


2” x 5” White Foamie #7761 3612

1 ½” x 2” Black Foamie #7761 3620

1” x 5 ½” Goldenrod Foamie #3004 1087

2 ½” x 2 ½” Red Foamie #7761 3604

2 – 7mm Moving Eyes #7766 0837

6” of Black Chenille Stem #7766 9721

Fine tip Black Marker #91029

Pin Back #7740 3337




Ό” Heart Hole Punch #7717 8632

Low Temp glue gun & glue sticks











Trace and cut out pieces from foamie according to the patterns.


Center white face piece onto the black head piece, aligning on the bottom edge as in the sample shown. Glue pieces together. Place the two eyes on the face and glue. Use the fine tip black marker to draw a smiling mouth under the eyes. Punch out two red hearts from the foamie with the heart hole punch. Place a heart on wither end of the smile and glue in place.


Use the marker to write “Bee Mine” on the large red heart. Place the heart in the center of the yellow arms. Wrap the arms around to the front of the heart and glue in place.


Use the marker to make detail outlines around the edge of the white wings. Place the head on the top center of the wings. Place the heart with the arms below the head. Glue all in place.


Fold the black chenille stem in half. Curl each end of the stem a couple of times to make the ends of the antennae. Glue to the back of the head. Glue the pin back behind the wings.



© 2007 Ben Franklin Crafts, Inc.


printer-friendly version


Back Home   Search Category   Search Name