2.5" x 2.5" Flesh Foamie #7761
3.5" x 3.5" Red Foamie # 7761 3604
4" x 4" White Foamie # 7761 3612
4" x 4" Blue Foamie # 7761 3489
3" of 26 gauge silver wire # 7718 6932
Heart Punch #7717 8632
18" of Brown yarn for hair # 7764 0532
Black fine tip Sharpie # 7753 1954
6" of 1/4" satin ribbon
Low Temp Glue gun & Glue sticks
Optional: 26 gauge copper/brown wire #3002 0897
Trace and cut out pieces from foamie according to the patterns.
Glue the red foamie star in the middle of the white foamie
piece. Following the star shape, trim the white foamie around
the edge of the red star, leaving about a 1/8" border. Glue this
star to the middle of the blue foamie. Trim around the edge the
same way, leaving a 1/8" border.
Use the black Sharpie marker and write in 2004 in the center of
the red star. Use the marker to make 2 dot eyes and a squiggly
smile on the face. Use the heart punch and punch out 2 hearts
from the scrap of red foamie for the cheeks. Glue the red heart
cheeks on either side of the smile.
Take the brown yarn and cut into 3 pieces 4" long. Knot together
on one end and braid the 3 strands of yarn together. At the end
of the braid, knot the other end. Use the rest of the yarn to
make a loopy bow. Cut loops apart and glue the center knot to
the center of the face's forehead for the bangs. Glue the braid
along the top of the head for the pigtails. Optional: If you
want the braids to stand out, Thread 3" piece of brown/copper
wire through the braids before gluing to the head. With the wire
in, you can shape the braided pigtails any way you want.
Position the head at the upper left of the star. Glue in place.
Glue the 2 hands on wither side of the face. Take the length of
silver wire and curl around a pencil. Stretch wire out and make
into a loop. Twist the ends of the wire together. Glue the
twisted end behind the head for the angel's halo.
Take the 6" of ribbon and knot ends together. Glue knotted end
behind star for a hanger.