Christmas In July
3 1/2" 5 1/2" Grey Foamie #7761 3471
1' x 4" White Foamie #7761 3612
1 – 7mm Moving Eye #7766 0837
2" x 2" Red felt #7767 6619
2 1/2" x 1/4" White felt #7767 6635
1/4" White Pom Pom #3000 6996
3/8" Jingle Bell #3005 5124
8" of 1/8" satin Ribbon for bell & bow
6" of 1/8" satin ribbon for hanger
Low Temp Glue Gun & Glue sticks
Trace and cut out pieces from foamies and felt according to the patterns.
Align the bottom of the dolphin body piece above the white belly piece. Slightly overlapping the two pieces and glue in place. Place the fin on top of the body as in the sample and glue in place. Glue the eye onto the head.
Roll the red felt piece together, matching the straight ends to form a cone shaped hat. Glue edges together. Place the white felt strip along the bottom edge of the hat and glue in place for the trim, cut off excess. Glue the white pom pom to the tip of the hat.
Place glue along the inside edge of the hat and place on top of the dolphin’s head. Fold the tip of the hat down at an angle and glue in place. Tie the ends of the 6” of 1/8” ribbon together. Glue behind the hat for the ornament’s hanger.
Make a small shoestring bow from part of the 8" of 1/8" ribbon. Glue to the top of the jingle bell. String the remaining 1/8" ribbon onto the jingle bell and tie the ends together. Slip the ribbon between the dolphins mouth and add a little glue behind to hold in place.