**Directions**
To follow the diagrams, color one end of the monofilament red and the other end black. When it is time to cross, take the opposite line and insert it through the last bead added on the opposite line making sure the lines are going in opposite directions of each other
1) Black: add 5 of the 4mm bicones. Cross.
2) Red: add 4 of the 4mm bicones. Cross.
3) Red: go in through 1 (adjacent) 4mm bicone. Black: add 3 of the 4mm bicones. Cross.
4) Black: go in through 1 (adjacent) 4mm bicone. Red: add 3 of the 4mm bicones. Cross.
5) Red: go in through 1 (adjacent) 4mm bicone. Black: add 3 of the 4mm bicones. Cross.
6) Black: go in through 2 (adjacent) 4mm bicones. Red: add 2 of the 4mm bicones. Cross.
7) Red: go in through 1 (adjacent) 4mm bicone. Black: add 3 of the 4mm bicones. Cross.
8) Black: go in through 2 (adjacent) 4mm bicones. Red: add 2 of the 4mm bicones. Cross.
9) Red: go in through 2 (adjacent) 4mm bicones. Black: add 2 of the 4mm bicones. Cross.
10) Black: go in through 2 (adjacent) 4mm bicones. Red: add 2 of the 4mm bicones. Cross.
11) Red: go in through 3 (adjacent) 4mm bicones then add 1 of the 4mm bicones. Cross.
Before you proceed to the next step, if you are putting a phone strap on, attach the bell to the phone strap, then insert the bell inside of the body making sure the phone strap comes out through the top of the body
(see Fig. A)
Add nose/eyes/ears (see Fig. B)
Add tail (see Fig. C)
Add feet (see Fig. D)
.
© 2007 Ben Franklin
Crafts, Inc.
printer-friendly
version
Back Home
Search Category
Search Name
All Projects List |